1/2 inch 10 PCS Srunv Socket Set (8-21MM)
Sizes: 8mm-10mm-11mm-12mm-13mm-14mm-15mm-17mm-19mm-21mm
-
Australia Owned -
Quality Guaranteed
-
Fast Shipping -
Hot Offers
Product Description
SRNUV Socket Set
- All SRUNV sockets are made from forged and hardened chrome vanadium steel with a corrosion-resistant chrome plated finish
- Quality steel alloy construction lets the sockets take on the toughest fasteners without cracking or slipping
- Notched drive locks onto ratchet or extension
Warranty
Everstore’s Products come with 1 Year Standard Warranty that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure of the Product. You are also entitled to have the Products repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure (the ‘Warranty’).
Please read our Warranties & Return information carefully.
Product Features
Sizes: 8mm-10mm-11mm-12mm-13mm-14mm-15mm-17mm-19mm-21mm
All Reviews
-
I found this product to be fair enough for
what I need them. I can not review torque
stability and rigidity since I will use them at
only 8-10 Nm max. I like there is hole through
socket and also what I find plus, walls or material
is not too thick. So socket can be used in tight
spaces where there is not too much empty area
around nut or bolt. -
Good quality sockets with a clip that
holds them securely. Especially pleased
that they are flank drive, ie with rounded
corners. The 10mm was strong enough
to remove glow-plugs from my Mondeo.
A single special socket for that job can
cost a deal more than this entire set.
Highly recommended. -
Excellent value for the home
mechanic. Well made and is an
essential for any tool box. -
A very good quality set of sockets for the price
made from chrome vanadium steel. The storage
rack is flimsy as is the spring clips that hold on
the sockets but the sockets themselves look well
made and fit snugly into a 1/4" driver. -
They are full hexagonal shaped to reduce the
chance of rounding off a nut and I have experienced
no problems so far and they are well shaped for
getting into tight areas without the additional bulk
of an extension socket. A useful addition to the
toolbox at a great price. -
No dislikes, great products and
would buy again. 110% Can't fault
these they look every bit as good
as some of my Facom and Snap
On tools, recommended. -
Needed these to remove a difficult to reach
nut. I repaired a part on my Saab 96, previous
owner had used a stupidly long bolt, leaving about
30mm of unnecessary thread in the way,
worked a treat, a worthy buy. -
This is a must have for any one
who loves DIY or a part time self
acclaimed mechanic really good
sturdy tool used well with my impact driver. -
These are much better quality than I was
expecting. They are very well made.
Good price too. Awesome sockets,
well made and the rail is a cool feature.
Would definitely recommend. -
Bought these for getting to a long threaded
bolt and they suited the job perfectly, so far they
haven’t rounded and the material seems strong
enough to last!
In The box
- 10 x 1/2" Socket Set
Product Description
SRNUV Socket Set
- All SRUNV sockets are made from forged and hardened chrome vanadium steel with a corrosion-resistant chrome plated finish
- Quality steel alloy construction lets the sockets take on the toughest fasteners without cracking or slipping
- Notched drive locks onto ratchet or extension
Warranty
Everstore’s Products come with 1 Year Standard Warranty that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure of the Product. You are also entitled to have the Products repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure (the ‘Warranty’).
Please read our Warranties & Return information carefully.
Product Features
Sizes: 8mm-10mm-11mm-12mm-13mm-14mm-15mm-17mm-19mm-21mm
All Reviews
-
I found this product to be fair enough for
what I need them. I can not review torque
stability and rigidity since I will use them at
only 8-10 Nm max. I like there is hole through
socket and also what I find plus, walls or material
is not too thick. So socket can be used in tight
spaces where there is not too much empty area
around nut or bolt. -
Good quality sockets with a clip that
holds them securely. Especially pleased
that they are flank drive, ie with rounded
corners. The 10mm was strong enough
to remove glow-plugs from my Mondeo.
A single special socket for that job can
cost a deal more than this entire set.
Highly recommended. -
Excellent value for the home
mechanic. Well made and is an
essential for any tool box. -
A very good quality set of sockets for the price
made from chrome vanadium steel. The storage
rack is flimsy as is the spring clips that hold on
the sockets but the sockets themselves look well
made and fit snugly into a 1/4" driver. -
They are full hexagonal shaped to reduce the
chance of rounding off a nut and I have experienced
no problems so far and they are well shaped for
getting into tight areas without the additional bulk
of an extension socket. A useful addition to the
toolbox at a great price. -
No dislikes, great products and
would buy again. 110% Can't fault
these they look every bit as good
as some of my Facom and Snap
On tools, recommended. -
Needed these to remove a difficult to reach
nut. I repaired a part on my Saab 96, previous
owner had used a stupidly long bolt, leaving about
30mm of unnecessary thread in the way,
worked a treat, a worthy buy. -
This is a must have for any one
who loves DIY or a part time self
acclaimed mechanic really good
sturdy tool used well with my impact driver. -
These are much better quality than I was
expecting. They are very well made.
Good price too. Awesome sockets,
well made and the rail is a cool feature.
Would definitely recommend. -
Bought these for getting to a long threaded
bolt and they suited the job perfectly, so far they
haven’t rounded and the material seems strong
enough to last!
In The box
- 10 x 1/2" Socket Set
